DHB-660 is a CNC double head bender capable of bending wire simultaneously from both ends, producing symmetrical wire forms with high efficiency and precision. Ideal for a wide range of wire bending applications.
Bends both ends of the wire at the same time, so symmetrical parts are formed in a single cycle.
8 controlled axes driven by 9 servo motors, under CNC control.
Independent left and right spinner movement and rotation, 1 KW each.
Left and right rotary plates with a servo rotary gripper for repeatable part handling.
Accepts wire Ø 2.5–6.0 mm in low carbon steel, to a maximum length of 1,500 mm.
| DHB-660 | |
|---|---|
| Wire Diameter | 2.5–6.0 mm (low carbon steel) |
| Axes | 8 axes (9 servo motors) |
| Left / Right Spinner Movement | 1 KW / each (2 axes) |
| Left / Right Spinner | 1 KW / each (2 axes) |
| Left / Right Rotary Plate | 1 KW / each (1 axis) |
| Rotary Gripper | 0.4 KW (1 axis) |
| Controller | CNC |
| Max. Wire Length | 1,500 mm |
| Dimensions (W×D×H) | 260 × 150 × 110 cm |
| Weight | 1,600 KGS |
| Power | 220V, 3 Phases |
Contact Seyunda for pricing, lead times, and technical consultation on the right wire and strip forming model for your requirements.